august 24, 2009 datatronic : 28151 highway 74, romoland, ca 92585 tel: 951-928-7700 fax: 951-928-7701 email: ddisales@datatronics.com 499 king?s road, hong kongtel: (852) 2562 3858, (852) 2564 8477 fax: (852) 2565 7214, (852) 2563 1290 all specifications are subject to change without notice. page 1 of 2 smd inductor dr354-0 series features ? smd 0402 chip inductor, low profile ? suitable for high frequency application ? inductance range from 1.0nh to 68nh ? operating temp. -40c to +125c ? tinned leads with leaded solder is available (note 4) electrical specifications at 25oc 900mhz 1.7ghz part number l(nh) @250mhz tolerance q min. l typ. q typ. l typ. q typ. srf (ghz) min. dcr (ohm) max. idc (ma) max. DR354-0-102 1.0 s 16 1.07 77 1.02 69 7.0 0.054 1360 dr354-0-202 2.0 s 16 1.93 54 1.93 75 7.0 0.084 1040 dr354-0-222 2.2 s 19 2.19 59 2.23 100 7.0 0.084 960 dr354-0-272 2.7 s 19 2.94 50 2.96 75 7.0 0.095 840 dr354-0-332 3.3 s 19 3.10 65 3.12 87 7.0 0.079 840 dr354-0-392 3.9 s 19 3.56 45 3.62 71 6.0 0.079 840 dr354-0-522-t 5.2 j,k 20 5.15 56 5.25 82 4.7 0.120 640 dr354-0-562-t 5.6 j,k 20 5.16 54 5.28 81 4.8 0.099 760 dr354-0-682-t 6.8 j,k 20 6.56 63 6.93 78 4.8 0.099 680 dr354-0-822-t 8.2 j,k 21 8.50 57 8.85 84 4.4 0.136 680 dr354-0-103-t 10 g,j,k 21 9.80 50 10.10 67 3.9 0.240 480 dr354-0-123-t 12 g,j,k 24 11.9 53 12.70 71 3.6 0.168 640 dr354-0-153-t 15 g,j,k 24 14.6 55 15.50 77 3.3 0.204 560 dr354-0-183-t 18 g,j,k 24 18.3 57 20.28 62 3.1 0.276 420 dr354-0-223-t 22 g,j,k 24 23.2 53 26.75 53 2.8 0.360 400 dr354-0-273-t 27 g,j,k 24 28.7 49 33.50 63 2.5 0.360 400 dr354-0-333-t 33 g,j,k 24 34.9 31 41.74 32 2.4 0.450 400 dr354-0-393-t 39 g,j,k 25 41.7 47 50.23 45 2.1 0.660 200 dr354-0-433-t 43 g,j,k 25 45.8 46 61.55 34 2.0 0.744 175 dr354-0-473-t 47 g,j,k 20 50.0 38 - - 2.1 0.792 175 dr354-0-563-t 56 g,j,k 22 62.8 42 - - 1.8 0.780 175 dr354-0-683-t 68 g,j,k 22 78.19 36 - - 1.6 0.912 150 inductance tolerance: when ordering, please specify the tolerance. t (k=10%, j=5%, g=2%, s=0.3nh)
august 24, 2009 datatronic : 28151 highway 74, romoland, ca 92585 tel: 951-928-7700 fax: 951-928-7701 email: ddisales@datatronics.com 499 king?s road, hong kongtel: (852) 2562 3858, (852) 2564 8477 fax: (852) 2565 7214, (852) 2563 1290 all specifications are subject to change without notice page 2 0f 2 1.19 max .64 max .66 max .25 .51 .23 2x .56 .66 2x .46 .36 2x mechanical outlines notes : 1. all dimensions are shown in millimeter ?mm? 2. general tolerance ? 0.3mm, unless other specified 3. tape and reel quantity, 8000 pcs/reel 4. for non-rohs parts replace dr prefix with 42- (e.g. dr354-0 becomes 42-354-0) 5. terminal finish is compliant to rohs requirements . solder in accordance with j-std-020d schematic suggested pad layout
|